The ECOtronic EC Series of PowerLine centrifugal fan incorporates an IE5* rated Electronically Commutated (EC) shaft motor delivering ultra energy efficient operation with the benefit of in-built variable speed control. Via a range of common control signals, the ECOtronic can be easily designed into a Demand Control Ventilation system without the need for a VSD and overload protection.

The ECOtronic EC fans are a simple “plug and play” system which means installers do not need to have specialised control programming knowledge. The series is available in 4 sizes ranging from 315 to 450mm diameter.

• EC motor features reverse polarity protection, locked rotor protection and soft start
• No additional protection such as current overloads are required
• Can be manually speed controlled by pressing 2 internal motor buttons
• Can be remote speed controlled with either a 2-10V or 4-20mA input signal or a 10 to 95% frequency duty cycle
• Can be run as an independent ventilation source or integrated into most building management systems
• Maximum operating speed can be adjusted from 1800rpm to 200rpm
• On board fault identification LED will flash according to fault type
• Integrated “Fire Mode” function forces motor to continue working under adverse conditions (at full speed)
• Easy to fit 35mm TDF profile flange connections.
• Robust, yet lightweight galvanised steel construction.
• Operating temperature: -20 °C to +60 °C when air velocity exceeds 5 m/s, otherwise -20 °C to +40 °C

• EC motor features reverse polarity protection, locked rotor protection and soft start
• No additional protection such as current overloads are required
• Can be manually speed controlled by pressing 2 internal motor buttons
• Can be remote speed controlled with either a 2-10V or 4-20mA input signal or a 10 to 95% frequency duty cycle
• Can be run as an independent ventilation source or integrated into most building management systems
• Maximum operating speed can be adjusted from 1800rpm to 200rpm
• On board fault identification LED will flash according to fault type
• Integrated “Fire Mode” function forces motor to continue working under adverse conditions (at full speed)
• Easy to fit 35mm TDF profile flange connections.
• Robust, yet lightweight galvanised steel construction.
• Operating temperature: -20 °C to +60 °C when air velocity exceeds 5 m/s, otherwise -20 °C to +40 °C

The duct mounted fans shall be of the in-line centrifugal ECOtronic PowerLine Series as designed and manufactured by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

They shall include galvanised steel housings with 35mm TDF profile flange connections.

They shall be driven by a EC shaft motor with integrated speed controller and motor overload protection. The direct drive centrifugal impellers will be made from aluminium.

All models shall be fully tested as a complete assembled unit to ISO5801: 2007 for air flow and BS848:Part 2, 1985 for noise