The Inline Filtered Supply Unit has been designed to provide
filtered outside air to a range of applications where direct fresh
air intake is not possible or practical.
Motor
Type – external rotor squirrel cage induction motor
Electricity supply - 230V, single-phase and 415, 3 phase, 50Hz
Bearings – sealed-for-life, ball
3-phase motors can be speed controlled using variable
speed drives
Internal Protection
Auto-reset type fitted as standard
Testing
Air flow tests based on ISO 5801.
Noise tests based on ISO 13347-3.
Performances shown are based on clean filters.
As air flow will be affected by room pressurisation, care should
be taken to ensure adequate air relief is provided.
Special Note
The Inline series of Filtered Supply Units shall be designed and
manufactured by Fantech Pty Ltd and be of the model numbers
shown on the schedule/ drawings.
The unit will have a galvanised steel housing with 35mm TDF
profile flange connections and incorporate a weatherproof
external grille if mounted flush to an external building wall.
It will include Pure-V washable G4 filters on the discharge side
of the fan.
The unit shall incorporate a Mixed-Flow impeller made from high
performance injected moulded composite plastic and driven by
an external rotor motor as nominated.
All performance data shall be for a complete assembled unit,
and based on ISO 5801 for air flow and ISO 13347-3 for noise.
Special Features
The Inline series of Filtered Supply Units shall be designed and
manufactured by Fantech Pty Ltd and be of the model numbers
shown on the schedule/ drawings.
The unit will have a galvanised steel housing with 35mm TDF
profile flange connections and incorporate a weatherproof
external grille if mounted flush to an external building wall.
It will include Pure-V washable G4 filters on the discharge side
of the fan.
The unit shall incorporate a Mixed-Flow impeller made from high
performance injected moulded composite plastic and driven by
an external rotor motor as nominated.
All performance data shall be for a complete assembled unit,
and based on ISO 5801 for air flow and ISO 13347-3 for noise.