Performance Curve - BRB20-510LS-22

Description

The Blue Rhino range of single width, single inlet (SWSI) centrifugal fans features a backward-curved laminar impeller and a heavy duty, fully welded construction. Their innovative design integrates a Variable Speed Drive (VSD) which eliminates the need for a high maintenance belt and pulley system. They are driven by a direct drive motor and are available with a long lasting hot dip galvanised finish or durable blue powder coating. The range is available in 15 impeller sizes, extending from 12 inch (305mm) to 44 inch (1120mm) diameter. Smaller sizes come in a box type design and larger sizes with a pedestal mounted motor.

Features

Casings and impellers are made of high strength fully welded mild steel
Controlled with VSD which eliminates the need for high maintenance belt and pulley system
VSD can be factory pre-configured to suit application, creating a time saving plug and play system
Fitted with inlet spigot and discharge flange
Comes standard with inspection hatches and drain plugs
Clockwise impeller rotation is standard, anti-clockwise rotation is available upon request
Driven by a reliable direct drive motor design
Comes standard with a long lasting hot dip galvanised finish or durable blue powder coating
Available in impeller diameter sizes from 12 to 30 inch
Efficient and compact design
Can be rotated onsite to 0, 90 or 180° position to suit installation requirements

Construction
Fully welded mild steel casings. Hot dip galvanised or blue powder coated finish. Impellers are fully welded. Backward-curved laminar impeller.

Motors
Type – standard TEFC squirrel cage induction motors
Electricity supply – three-phase to suit a wide range of voltages and frequencies.

Internal Thermal Protection
Thermistors can be provided.

Testing

Air flow tests based on ISO 5801
Noise tests based on ISO 13347-3

Suggested Specification

The single width, single inlet (SWSI) centrifugal fans shall be of the Blue Rhino series as designed and manufactured by Fantech Pty. Ltd. and be of the model numbers shown on the schedule/drawing. The housings and impellers shall be made from fully welded mild steel with hot dip galvanised or blue powder coated finish. Impellers shall be backward-curved laminar design, rotating clockwise unless specified otherwise. They shall be driven by a direct drive motor and designed to operate with a Variable Speed Drive which can be factory pre-configured to suit the application. They shall be fitted with inlet spigot and discharge flange, and come standard with inspection hatches and drain plugs. Air flow data shall be based on tests to ISO5801:2007.

Technical Data - BRB20-510LS-22

Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
22		1.5	3.2	40	222

Sound Data

Type	63	125	250	500	1K	2K	4K	8K
Inlet	86	81	80	80	78	72	65	59

Dimensions

A	B	C
1122	1004	851

*All dimensions in mm, unless otherwise stated

Wiring Diagram

Diagram shown is for single-speed only.
For 2-speed and special motors, contact Fantech for details.